Cell phone signal blockers | block cellphone signals

A roundup of recent products in the GNSS and inertial positioning industry from the December 2018 issue of GPS World magazine. OEM Combination antenna Long-range connectivity Photo: Molex The Molex highly compact 2.4/5-GHz combination GPS/Wi-Fi ceramic antenna is designed to be a cost-competitive solution covering the full GNSS band, 1.561 to 5.85 GHz. The triple-band ceramic antenna has Wi-Fi HaLow compatibility and is interference-resistant, supporting larger but lower (900-MHz) frequency ranges than 2.4/5-GHz connections. It also operates with lower power over longer ranges than 2.4/5-GHz Wi-Fi. Advanced Wi-Fi applications the internet of things, connected cars, smart homes and smart cities. Molex, www.molex.com GNSS module Built-in flash memory Photo: Fujitsu The MSB1054 multi-receiver module requires no external components, meeting needs of smartwatches, fitness trackers, logistics and navigation. Its Flash memory saves navigation data to optimize performance and provide a hot start. The ability to receive signals from several satellite systems significantly reduces the time to first fix. The module provides a built-in RF-front end (SAW filter, low-noise amplifier) as well as a temperature-compensated crystal oscillator (TCXO), so no external component is required other than an antenna. It measures 5.8 × 6.2 × 1 millimeters and uses 3.4 mA current in low-power mode, such as for tracking. Fujitsu Electronics Europe, www.fujitsu.com/uk/ GNSS IoT module Aimed at European market The GE310-GNSS module. (Image: Telit) The GE310-GNSS is an internet of things (IoT) module with GSM/GPRS, multi-constellation satellite positioning and Bluetooth functionality in a 270-millimeter-squared form factor. It meets European demand for GSM/GPRS compact form factors and is part of Telit’s migration-support program that helps customers leverage 2G’s low cost and broad coverage while preparing for 4G and 5G. The GE310 enables OEMs and system integrators in asset management, utilities and telematics to meet the strong demand for low-cost, highly compact devices without tradeoffs in performance, reliability and functionality, particularly in regional markets such as Europe, where 2G is forecast to remain in strong growth in number of IoT connections for many years. Telit, www.telit.com GNSS/INS board With multi-sensor fusion positioning and orientation Photo: Unicore The CLAP-B multi-GNSS/MEMS integrated inertial navigation board features a miniaturized high-performance inertial measurement unit (IMU) on a compact high-performance GNSS board. The high-accuracy GNSS positioning coupled with a high-precision gyro and accelerometer provides stable, continuous 3D position, velocity and attitude, as well as original acceleration and angular velocity measurements, even in GNSS-denied environments. CLAP (Concurrent Localization & Attitude Pilot) technology is a high-precision multi-sensor fusion positioning and orientation technology developed by Unicore. The board is compact, light weight and has low power consumption. It is designed for ease of integration and mass production, and is suitable for autonomous driving, smart surveying and UAVs. Unicore Communications, www.unicorecomm.com GNSS receiver Can serve as base station or rover Photo: Marxact The UNI-GR1 RTK GNSS receiver offers highly accurate heading and positioning output. It can be connected to any device through Wi-Fi, mobile data, radio, USB or serial cable. It simultaneously tracks GPS L1/L2/L5, GLONASS L1/L2, Galileo E1/E5a/E5b and Beidou B1/B2/B3 on 432 channels. The receiver has a built-in level, a LED ring driven by a nine-degrees-of-freedom inertial measurement unit. Users can configure numerous settings such as real-time kinematic, or begin surveying immediately with a smartphone or laptop. Marxact, www.marxact.com SURVEY & MAPPING Smart antenna tilt Designed for rugged jobsites Photo: Trimble Dynamic tilt functionality has been added to the Trimble SPS986 GNSS smart antenna. The dynamic tilt upgrade allows for faster data collection to enable construction surveyors to create larger digital terrain models faster and with improved accuracy. It can capture higher accuracy measurements on steeper slopes from a moving vehicle and more accurate volume measurements to save time and money on material planning. The dynamic tilt measurement mode also auto-measures antenna height. From inside the vehicle, contractors can set the height of the antenna and quickly interrogate surface models using the real-time 3D surface display in Trimble Siteworks field software. Trimble, www.trimble.com On-site data processing With Kespry and DJI drones Edge1 base station. (Photo: Skycatch) The Skycatch Edge1 is an on-premise data processing and GNSS base station optimized for the Skycatch Explore1 and DJI Phantom 4 RTK drones. Field teams can fly a drone, process the data and receive centimeter-level data output in 30 minutes or less, directly to a tablet, without the need for internet or cellular connectivity. 2D maps and 3D point clouds can be shared from the tablet. The Edge1 includes built-in WiFi, LTE and reliable sub-5-centimeter accuracy, and delivers high-quality data output. It is also capable of running deep learning algorithms to extract more insights from collected data in near real time. Skycatch, www.skycatch.com; DJI, dji.com Drone software To derive topographic information from drone data Screenshot: Virtual Surveyor Drone surveying software Virtual Surveyor now eliminates the need for clients to use third-party applications to prepare data for processing. Version 6.1 handles on-the-fly projections that previously required a separate software package to set the data in the proper coordinate system. It bridges the gap between UAV photogrammetric processing applications and engineering computer-aided design (CAD) packages. The software generates an interactive onscreen environment with UAV orthophotos and digital surface models where the surveyor selects survey points and breaklines to define the topography, creating highly accurate topographic products for CAD input up to five times faster than otherwise possible. Surveyors can drag and drop all kinds of files into Virtual Surveyor: points, raster, vectors and point clouds. The point clouds are converted to a DSM for manipulation and processing, dramatically accelerating the time required to generate the CAD model. Virtual Surveyor, www.virtual-surveyor.com Redistricting software Includes Efficiency Gap Measure to explore redistricting problems Screenshot: Mapitude Maptitude for Redistricting is a professional tool for political redistricting. Maptitude provides measures and reports that support the creation of fair and balanced districts, and regularly enhances the software. Maptitude was used to democratize redistricting in California and is used by redistricters from independent commissions, non-profits, and civil rights groups, to the courts and political parties. Mapitude, www.caliper.com Mining solution Stockpile measurements are up to 80% more accurate Photo: DJI The DJI Mavic 2 Pro drone is now part of the Kespry stockpile measurement solution for mining and aggregates companies. Kespry’s stockpile measurement solution produces data up to 80% more accurate than manual measurement. All of the survey data is stored in a central cloud application, accessible for analysis by the entire team. Large aggregates and mining companies can standardize and capture stockpile data across all their sites in the Kespry platform, while using Kespry 2s or DJI Mavic 2 Pro drones. Kespry, www.kespry.com; DJI, dji.com TRANSPORTATION C-V2X Module Designed for next-generation automotive applications Image: Quectel The automotive-grade C-V2X module AG15 features the Qualcomm 9150 C-V2X chipset paired with Quectel LTE module AG35. It is designed to meet the telematics and vehicle-to-everything (V2X) connectivity requirements of autonomous driving and road safety. It features a built-in multi-constellation high-precision GNSS (GPS/GLONASS/BeiDou/Galileo/QZSS) receiver with additional support from satellite-based augmentation systems (SBAS) and Qualcomm 3D dead-reckoning technology, which improves positioning accuracy and speed while simplifying customer designs. It is designed to allow low-latency, highly reliable and highly dense data exchange between vehicles and their surroundings, enabling effective information sharing among road users to avoid collisions, thus improving automotive safety, automated driving and traffic efficiency. Quectel Wireless Solutions, www.quectel.com Automotive microcontroller Enables remote updates, in-vehicle networking Image: STMicroelectronics The SPC58 Chorus H microcontroller (MCU) line can run multiple applications concurrently to allow more flexible and cost-effective vehicle electronics architectures. The line is designed for high-end body, networking and security applications such as gateways, body-control modules, battery management and ADAS safety systems. The line has three high-performance processor cores, more than 1.2-MB RAM and powerful on-chip peripherals. The MCU securely delivers updates over the air for vehicle powertrain, body, chassis and infotainment features. With high security and large on-chip code storage, ST’s Chorus automotive microcontroller is a gateway/domain-controller chip capable of handling major OTA updates securely. Two independent Ethernet ports provide high-speed connectivity between multiple Chorus chips throughout the vehicle and enable responsive in-vehicle diagnostics. STMicroelectronics,www.st.com Testing system For advanced driver-assistance systems (ADAS) Photo: The VBOX 3i RTK is a real-time-kinematic-enabled version of the VBOX 3i dual antenna that can be used in conjunction with an RTK differential base station to obtain ±2-centimeter positional accuracy in real time at 100 Hz. The data logger combines the advantages of a twin antenna GPS setup with GLONASS satellite tracking. It can be used in vehicle tests where positional accuracy and repeatability are of key importance, such as lane departure testing, distance to a fixed object or precise mapping. The VBOX 3i RTK comes with the VBOX manager, a display enabling users to change dynamic modes and filter settings, set up slip angle data and define antenna locations. Racelogic, www.racelogic.co.uk Tracker Provides built-in Wi‑Fi hotspot Photo: ERM Telematics The StarLink TrackerWi‑Fi advanced vehicle-tracking device combines u-blox GNSS, 4G and Wi-Fi technology, eliminating the need to equip vehicles with a separate mobile Wi‑Fi hotspot. StartLink is suitable for applications for connected cars, telematics, vehicle diagnostics, fleet management, vehicle security, usage-based insurance, and rental and leasing service companies. With the Wi‑Fi hotspot, users can tap into cellular 4G to transfer telematics data to the fleet manager and send real-time data to the driver’s smart device or infotainment system. u-blox, www.u-blox.com; ERM Advanced Telematics, ermtelematics.com UAV Underwater drone Enables stable imaging The Notilo Plus team with the iBubble. (Photo: Notilo Plus) Notilo Plus has launched iBubble, a fully wireless, autonomous and intelligent underwater drone that can be used for search-and-rescue operations, naval or underwater infrastructure maintenance, and subsea patroling. iBubble can accompany divers for up to an hour and down to 197 feet depth, enabling superior underwater imaging. The remotely operated vehicle (ROV) was designed using a patented underwater localization technology, which is mainly based on acoustic signal transmission and image recognition (video tracking). By combining these technologies, iBubble is able to locate precisely its target underwater and shoot stable footage. The iBubble is equipped with an obstacle avoidance system, real-time image recognition, a stabilization system and direct surface control. Notilo Plus, www.notiloplus.com Compact drone Captures images of inaccessible areas Photo: Parrot Anafi Work is an ultra compact tool for professionals, helping them make informed decisions using the drone’s aerial insights. Anafi Work includes the advanced Anafi drone equipped with an innovative imaging system, a 4K/21MP camera with a 180° vertical orientation, allowing users to capture images of inaccessible areas.The drone operates for 1 hour and 40 minutes with its 4 USB-C smart batteries. It can be transported anywhere in a compact shoulder bag. Professionals can create 3D models of buildings, quickly and easily, using a one-year subscription to Pix4Dmodel. Parrot, www.parrot.com Airborne sensors Laser scanners for large UAVs Photo: Riegl The Riegl VQ-480 II and VQ-580 II are designed for airborne applications at mid-altitudes for use on both manned and unmanned aircraft. The new Mark 2 designs of previous models improve both performance and user-friendliness. Both offer a measurement rate of up to 1,250,000 measurements/second and a 75-degree field of view of suitable for corridor mapping, city modeling and applications in agriculture and forestry. Weighing approximately 10kg, they are ready for integration into helicopters and unmanned UAVs with a higher payload capacity. The VQ-480 II and VQ-580 II are prepared for smooth GNSS/IMU integration, offer interfaces for up to five optional cameras, and are have built-in and removable storage.The VQ-480 II works at a laser wavelength of 1550 nm; the VQ-580 II at the1064 nm wavelength suited to measure on ice and snow. Riegl, www.riegl.com UAV security Designed to protect outdoor events The portable DroneNode. (Photo: DroneShield) DroneNode is a portable, compact and inconspicuous counter-drone jamming device that law enforcement can use at large outdoor events without raising public concern (it is not yet authorized for use in the U.S.) It can simultaneously jam 2.4 GHz, 5.8 GHz and GNSS L1 and L2 bands up to one kilometer, causing drones to return to their point of origin or land. It is also effective against swarm attacks. Emergency broadcasts, cellphone communication and other dedicated channels are unaffected. DroneShield, www.droneshield.com Action drone Follow drone with obstacle avoidance Photo: Skydio Skydio R1 users now have the ability to follow cars. New modes include Car Follow, improved Lead Mode, and other improvements throughout the system, which is built on top of the Skydio Autonomy Engine. The engine operates 13 cameras, enabling it to map and understand the world in real time, allowing it to be fully autonomous and independently capture video footage. Its Nvidia Jetsonl AI runs neural networks that trained for the Car Follow feature on datasets of automobile images. Skydio, www.skydio.com

cell phone signal blockers

Delta adp-180hb b ac adapter 19v dc 9.5a 180w switching power su,f10603-c ac adapter 12v dc 5a used 2.5 x 5.3 x 12.1 mm.canon ch-3 ac adapter 5.8vdc 130ma used 2.5x5x10mm -(+)-,viewsonic adp-80ab ac adapter 12vdc 6.67a 3.3x6.4mm -(+)- power.35-15-150 c ac adapter 15vdc 150ma used -(+) 2x7xmm round barrel.hoover series 300 ac adapter 5.9vac 120ma used 2x5.5mm round bar,atlinks 5-2418a ac adapter 9vac 400ma ~(~) 2x5.5mm 90° used 120v,kodak hpa-602425u1 ac adapter 24v dc power supply digital doc.the project is limited to limited to operation at gsm-900mhz and dcs-1800mhz cellular band,thermo gastech 49-2163 ac adapter 12.6vdc 220/70ma battery charg,10 – 50 meters (-75 dbm at direction of antenna)dimensions,ac power control using mosfet / igbt,hp compaq pa-1900-15c2 ac adapter 19vdc 4.74a desktop power supp,bml 163 020 r1b type 4222-us ac adapter 12vdc 600ma power supply,25r16091j01 ac adapter 14.5v dc 10.3w class 2 transformer power,the multi meter was capable of performing continuity test on the circuit board,cui 3a-501dn09 ac adapter 9v dc 5a used 2 x 5.5 x 12mm,duracell cef-20 nimh class 2 battery charger used 1.4vdc 280ma 1.swingline ka120240060015u ac adapter 24vdc 600ma plug in adaptor.electra 26-26 ac car adapter 6vdc 300ma used battery converter 9,this is as well possible for further individual frequencies,ktec wem-5800 ac adapter 6vdc 400ma used -(+) 1x3.5x9mm round ba,hp adp-65hb n193 bc ac adapter 18.5vdc 3.5a used -(+) ppp009d.

Ite up30430 ac adapter +12v 2a -12v 0.3a +5v dc 3a 5pin power su, wifi jammer ,signal jammers are practically used to disable a mobile phone’s wi-fi,gateway lishin 0220a1890 ac adapter 18.5v 4.9a laptop power supp,ryobi p113 ac adapter 18vdc used lithium ion battery charger p10.condor 3a-066wp09 ac adapter 9vdc 0.67a used -(+) 2x5.5mm straig.lt td-28-075200 ac adapter 7.5vdc 200ma used -(+)2x5.5x13mm 90°r,the third one shows the 5-12 variable voltage.nikon coolpix ni-mh battery charger mh-70 1.2vdc 1a x 2 used 100.its called denial-of-service attack.the gsm1900 mobile phone network is used by usa,dlink jentec jta0302c ac adapter used -(+) +5vdc 3a 1.5x4.7mm ro,potrans up04821135 ac adapter 13.5v 3.5a power supply.frequency correction channel (fcch) which is used to allow an ms to accurately tune to a bs,sony ac-e351 ac adapter 3v 300ma power supply with sony bca-35e.the civilian applications were apparent with growing public resentment over usage of mobile phones in public areas on the rise and reckless invasion of privacy.cisco systems adp-33ab ac adapter +5v +12v -12v dc 4a 1a 100ma.jvc ap-v10u ac adapter 11vdc 1a used 1.1x3.5mm power supply camc,whether copying the transponder,680986-53 ac adapter 6.5v 250ma used cradle connector plug-in,olympus li-40c li-ion battery charger 4.2vdc 200ma for digital c,canon cb-5l battery charger 18.4vdc 1.2a ds8101 for camecorder c,digipower acd-nk25 110-220v ac dc adapter switching power supply.

Shen zhen zfxpa01500090 ac adapter 9vdc 1.5a used -(+) 0.5 x 2.5,canon cb-2lwe ac adapter 8.4vdc 0.55a used battery charger.aurora 1442-200 ac adapter 4v 14vdc used power supply 120vac 12w,ault 336-4016-to1n ac adapter 16v 40va used 6pin female medical,to create a quiet zone around you,.

2022/01/22 by lZ_6gv@gmail.com

, ,
  • Cell Phone Jammer for sale
, ,

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account. Note: Your post will require moderator approval before it will be visible.

Guest